Chhogori (K2): is a Medium Format, Direct Drive, Enclosed FDM Printer.
Stats:
- Fully Enclosed Design
- 2020, 2040, and 2060 Frame Members
- Insulated Build Chamber (Not Heated)
- Build Volumes of ~250^3 to 500^3 (use of whole plate available) + additional area to purge and wipe
- Z can theoretically be 1m tall, just not fully supported or tested
- Direct Drive Extruder (Sherpa Mini or Ascender)
- Shortest Belt Paths Possible, 4 Motors, 2 Per X, 2 Per Y Axis
- Moving Bed, Fixed Gantry
- MGN12C Rails for XYZ Stationary Rails
- MGN12C Rails with 1515 Backers for XY Cross (Moving Members)
- 12mm 2GT Belts on XY Motion
- 12mm 2GT Belts with 20 or 40:1 Worm Drive on Z to lift the Bed
- Hybrid Laser Cut Metal and Printed Part Construction
- Legacy Support for 15mm 3HTD belts also offered
- Heavy Duty Bearings
- NEMA17 Motors XYZ
- Minimal Printed Parts (ABS or ASA Required)
- Fysetc Spider or S6 Controller + BTT Expander Board with Klipper Required
- Mosquito Style, Dragon Style, Mosquito Magnum+ and Nitram's VolcoMosquito hotends supported
- 24V Power Standard
- Mains Bed
- 2020, 2040, and 2060 Frame Members
- Insulated Build Chamber (Not Heated)
- Build Volumes of ~250^3 to 500^3 (use of whole plate available) + additional area to purge and wipe
- Z can theoretically be 1m tall, just not fully supported or tested
- Direct Drive Extruder (Sherpa Mini or Ascender)
- Shortest Belt Paths Possible, 4 Motors, 2 Per X, 2 Per Y Axis
- Moving Bed, Fixed Gantry
- MGN12C Rails for XYZ Stationary Rails
- MGN12C Rails with 1515 Backers for XY Cross (Moving Members)
- 12mm 2GT Belts on XY Motion
- 12mm 2GT Belts with 20 or 40:1 Worm Drive on Z to lift the Bed
- Hybrid Laser Cut Metal and Printed Part Construction
- Legacy Support for 15mm 3HTD belts also offered
- Heavy Duty Bearings
- NEMA17 Motors XYZ
- Minimal Printed Parts (ABS or ASA Required)
- Fysetc Spider or S6 Controller + BTT Expander Board with Klipper Required
- Mosquito Style, Dragon Style, Mosquito Magnum+ and Nitram's VolcoMosquito hotends supported
- 24V Power Standard
- Mains Bed
Includes printed FDM parts for the the entire machine (4z setup), except the following:
- Panel Clips and Locks
- Printer Foot and Associated Mounting Bracket
- Filament Presence Detection Switch
- Printer Foot and Associated Mounting Bracket
- Filament Presence Detection Switch
- Internal Mount Spool Holder
- Electronics Box Corners (unless chosen)